 |
Palas – PMFT 1000
PMFT 1000 for Test of respiratory masks better than the standard. Exact analysis of filter mask efficiency. |
|
|
|
||
 |
Palas – PMFT 1000 M
PMFT 1000 M for Test of respiratory masks better than the standard. Exact analysis of filter mask efficiency from 145 nm up to 40 µm. |
|
|
|
||
 |
Palas – CIF 1000
CIF 1000 test rig for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1 |
|
|
|
||
|
Palas – CIF 2000
CIF 2000 test rig for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1 |
|
|
|
||
|
Palas – CIF 3000 CIF 3000 test rig for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1 |
|
|
|
||
 |
Palas – DFP 3000 Compressed Air Filter Test Rig DFP 3000 delivers fully-automated measurements of fraction separation efficiency for compressed air filters under overpressure up to 7 bar, offering better results in the process than ISO 12500. |
|
|
|
||
 |
Palas – Fidas® 100 Fine Dust Monitor System
Real-time dust monitor for indoor air quality measurements and workplace exposure assessments. |
|
|
|
||
 |
Palas – Fidas® 200 Fine Dust Monitor System
Fine dust monitoring and immission measurement system for the measurement of PM1, PM2.5 as per EN 14907 and PM10 as per EN 12341 |
|
|
|
||
 |
Palas – Fidas® 200 S Fine Dust Monitor System
New, suitability-tested immission measurement system for continuous and simultaneous measurement of PM2.5 and PM10 |
|
|
|
||
|
Palas – Fidas® 300 Fine Dust Monitor System
Fine dust monitoring and immission measurement system for the measurement of PM1, PM2.5 as per EN 14907 and PM10 as per EN 12341 |
|
|
|
||
|
Palas – Fidas® 300 S Fine Dust Monitor System
Equipped with a large weather station |
|
|
|
||
 |
Palas – Fidas® mobile Fine Dust Monitor System mobile
Portable, battery-operated, real-time dust monitor for emission and workplace exposure measurements |
|
|
|
||
 |
Palas – HMT 1000 Heatable Modular Test System for Oil Mist Separators
HMT 1000 – Heatable modular testing system for oil nebulizers better as ISO 17536 with +/- 200 mbar control |
|
|
|
||
 |
Palas – HMT 1000 P Heatable Modular Testing System for Oil Nebulizers
HMT 1000 P – Heatable modular testing system for oil nebulizers better as ISO 17536 with +/- 200 mbar control |
|
|
|
||
 |
Palas – MFP 1000
Fast and okonomical quality control and development of flat media with dust, oil or salt starting at 120 nm. Versions MFP 1000 HEPA for EN 1822-3 and ISO 29463-3 |
|
|
|
||
 |
Palas – MFP 1000 HEPA
MFP 1000 HEPA with Promo® 1000 |
|
|
|
||
 |
Palas – MFP 3000 C
This version is for testing filter media better than DIN 71460 and ISO 11155-1 road vehicle interior filters |
|
|
|
||
 |
Palas – MFP 3000 FTD
MFP 3000 with additional test duct for 400 cm² filter test area |
|
|
|
||
 |
Palas – MFP 3000 G
This version is for testing filter media better than EN 779 room air filters |
|
|
|
||
 |
Palas – MFP 3000 HF
Active control of the relative humidity from 10 to 80 % and temperature from -10 to 50 °C |
|
|
|
||
 |
Palas – MFP 3000 M
This version is for testing filter media better than ISO 5011 / ISO TS 19713 engine air filters |
|
|
|
||
 |
Palas – TVE 3000 for Vacuum Cleaner Tests with Dust
TVE 3000 is for vacuum cleaner tests with dust in accordance with the standard EN 60312 |
|
|
|
||
