Scratch Testing Device KKO/KFN/LHP BMW EK 341
- Description
- MEASUREMENT APPLICATION
- TECHNICAL PARAMETER
- VIDEO
- DOWNLOAD
Description
Characteristics
- For testing the scratch resistance of synthetic surfaces in the receiving area a device which is easy to operate, allows quick tests and allows only small impact on the results by operator errors of the testing staff is required.
KKO
The device consists of a plane, a hard metal cutter and the load spring. A spring pushes the test cutter on the tapered bottom side of the plane. The pushing force of the spring can be adjusted continuously variably on a load scale, according to the synthetic material to be tested. The plane is then led over the specimen surface with a steady speed.
The criteria for scratch resistance is the visibility of scratches.
KFN
This simulates which impacts leave scratches from fingernails on the instrument panel or on Plexiglass surfaces and up to which distance these are visible with the naked eye. The testing device has to be designed in such a way that operator errors of the staff will only have small impact on the results. A semicircular hard metal cutter is positioned on the bottom side (specimen surface) of a tapered plane. This cutter can be tightened with a spring in order to produce different scratching traces. The criteria for determining the quality of the tested material is the visibility of scratches from ca. 40 cm to 80 cm from the position of the driver and front-seat passenger, including the consideration of the view angles. The main criteria for defining the distance are the usual distances between eye and surface when driving and when boarding and leaving the vehicle.
LHP
The device detects variations in the adhesive strength between finishing paint and filler. It is suitable for measurements with a comparative value or without.
In the test a graver with a hard metal cutter is pressed against a specimen in an angle of 10°. The tension of the spring can be set continuously variably on a load scale. The measured value is the spring tension with which the finishing paint is only just chipped.
Geometry of specimen: | Synthetic surfaces / coatings |
Testing standards: | BMW EK 341 |
Sensory functions: | – |
Power input: | – |
Dimensions (testing device): | 200 x 60 x 60 mm (W x D x H) |
Weight (testing device): | ca. 500 g |
Coming soon
Coming soon
Related products
-
heat conduction, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, safety, WAZAU, WAZAU, WAZAU, WAZAU, WAZAU
Glow Wire Testing Device GPD DIN EN 60695-2-10
Read moreQuick View -
Abrasion, Abrasion, Aging and Durability, Aging and Durability, Aging and Durability, military sonder, military sonder, military sonder, military sonder, military sonder, military sonder, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection
Abrasion Testing Device APG SN 27650
Read moreQuick View -
All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, laboratory supplies and consumables, laboratory supplies/consumables, LIBERO, mask, medical treatment and health care, Personal Hygiene Products, through the blood
Synthetic Blood
Read moreQuick View -
heat conduction, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, safety, safety, safety, thermal protection and combustion
Testing Device INB DIN EN ISO 1182
Read moreQuick View