Testing Device Spread of Flame ISO 5658-2 / IMO A 653(16)
- Description
- MEASUREMENT APPLICATION
- TECHNICAL PARAMETER
- VIDEO
- DOWNLOAD
Description
Characteristics
- Lateral spread of flame on vertically arranged construction products
The results of this testing procedure are used as a basis for evaluating the burning behavior of a lateral flame which spreads along a specimen. The heat radiation which a radiant heater applies to a specimen simulates the probable degree of stress that acts upon a specimen in a fire scenario. The sample is placed in a horizontal position under the gas-heated radiant heater that is inclined by 15 +/- 3° against the horizontal line. The sample is exposed to a certain heat stream. A pilot flame is brought into contact with the hot end of the sample. After ignition any flame front that forms is registered and its horizontal spread along the length of the specimen is recorded as the time the flame front needs for spreading over defined distances. For the IMO standard an exhaust flue with thermocouples is used to calculate the maximum heat release rate and the released total amount of heat. Controlling and measurement data recording is done with the software. It provides the calibration, valve control, preheating and CHF calculation.
Type of specimen: | Floor cover |
Test standards: | ISO 5658-2 / IMO A.653(16) |
Sensors: | Temperature / mass throughput / heat flow |
Supplies: | 230 VAC / 150 VA Propane gas / compressed air |
Dimensions (test device): | 1500 x 1700 x 1000 mm (W x D x H) |
Weight (test device): | approx. 250 kg |
Coming soon
Related products
-
Biomaterials, Building and Construction, Electro-Tech Systems, Electronics, environmental control, environmental control, Filters, laboratory supplies/consumables, medical treatment and health care, packaging, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, safety protection, thin film
ETS 5533 X-Large Integrated Environmental Chamber/Glove Box
Read moreQuick View -
materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, pressure and bending, textile and garment, textile and garment, textile and garment, textile and garment, textile and garment, textile and garment, textile and garment, textile and garment, textile and garment
DMS Compression and Tension Force Sensor
Read moreQuick View -
light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, light industry shoe materials, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, non-woven, safety, safety, safety, safety
DMS Compression Force Sensor
Read moreQuick View -
protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, protective materials, WAZAU, WAZAU, WAZAU, WAZAU, WAZAU, WAZAU, WAZAU, WAZAU
Friction Testing Device RPG DIN EN ISO 8295
Read moreQuick View -
All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, All Brands, military sonder, military sonder, military sonder, military sonder, military sonder, military sonder, military sonder, military sonder, military sonder, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, safety property of equipment, thermal protection and combustion, thermal protection and combustion
Testing Device INB DIN EN ISO 1182
Read moreQuick View